ELECTRO glove class 0, YELLOW, 9

LENGTH: 36 cm THICKNESS: 1.0 mm MATERIAL: Natural latex. 5,000V insulation. The protective glove for live working, classified as Class 0, offers insulation up to 5,000V, ensuring reliable protection during electrical operations. Tested at a test voltage of5 kV for 3 minutes and a withstand voltage of 10 kV, suitable for work on electrical installations with a nominal voltage of up to 1000V AC and 1500 DC. Made from high-quality materials, the glove is supplied in a sealed polyethylene case, ensuring that it remains protected and in optimal condition until use. The glove is resistant to oil, acid, nitrogen and low temperatures, making it extremely versatile and suitable for a wide range of industrial applications. The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments. Warnings: Protection against contact with voltage-carrying parts under voltage. Make sure the garment is in good condition, undamaged and clean before use. Once you become aware of a damage, you should immediately replace it. We recommend six-monthly voltage test. Store the gloves in their original sealed case, in a dry place far from the light, at a temperature between 5-35° C. If gloves become soiled with sticky substances or dyes, they shall be rubbed with suitable solvents, without brushes or abrasive paper. Do not use naphtha, gasoline, liquid paraffin, toluene, xylene, etc. Then wash with water at a temperature below 25° C and soap and dry thoroughly.

Datasheet

EN 60903 Classe 0 Category RC LENGTH: 36 cm THICKNESS: 1.0 mm MATERIAL: Natural latex. Insulation at 5,000V.